Wall putty is very important while painting uncolored walls. Moreover, the appearance of paint also increases the time when that paint can perform the task for which it has been bought. Thus, while finalizing any particular wall putty for your home certain critical points have to be kept in mind such as quality, durability of that wall putty, and wall putty price with the type/series of a wall. And then, it is followed by the guidance given below that helps decide on the best wall putty when one is moving into a new building or renovating one.
What is Wall Putty?
Wall putty is a white cement-based material used on plaster, painted walls, or ceilings to provide a smooth flat surface. They seal the gaps and uneven surfaces and protect the surface from paint chalking or peeling. Wall putty is normally used before painting to provide the paint with a good angle that can last for some time. The other is the POP used for ceiling construction, which provides a smooth and refined interior appearance.
Why is Wall Putty Important?
- Smooth Finish: Wall putty also conceals small imperfections on walls by gluing them and making them perfectly soft.
- Increases Paint Longevity: Thus, it has the added advantage of decreasing the rate of moisture absorption thus increasing the shelf life of paints.
- Improves Adhesion: Wall putty provides a better surface for the paint and helps to avoid situations where the paint will start to peel or crack later.
If the original is complemented by elements like the plaster of the Paris ceiling, then the combinations give rather beautiful ideas of aesthetic interiors.
Tips on How to Select the Right Wall Putty
Some crucial factors to consider when selecting the right wall putty are as follows.
1. Assess the Surface Type
- Several types of putty are also available, and their application depends on the wall surface on which they are to be applied.
- For New Walls: Select a white-cement-based putty for greater bonding properties and good durability.
- For Renovation: The putty based on acrylic is used only on painted or finished walls and surfaces that cannot be painted.
In addition, if your space is commissioned with a plaster of Paris ceiling, make sure that the wall putty you apply is of a similar feel and finish.
2. Consider the Wall Putty Price
The wall putty price tends to fluctuate based on the classification of standards or foreign and its brand.
- White cement-based putty: Tends to be costlier than the others, but its durability levels cannot be compared.
- Acrylic Putty: A slightly cheaper and may not be suitable for use in areas with high humidity.
As previously described, it is recommended to assess your budget and the needs of your office or home before buying the products online.
3. Moisture Resistance
When selecting putty for specific rooms that are usually moist, especially the washroom or kitchen, you should go for high moisture-resistant putty. A moisture-resistant wall putty acts as an insulating agent and helps water penetrate and damage the paint and the wall construction beneath.
4. Look for Crack Resistance
Make sure that the specific putty you choose has a good filling up of crack qualities. Fences and walls are prone to developing settlement cracks because of soil settlement, temperature changes, or structural problems. The best way to overcome such faults is to use high-quality wall putty also; in the case of adding wall paneling, the chances of unevenness in its surface and the occurrence of other such faults can be minimized with high-quality wall putty.
5. Easy Application
Such a mess is easily placed on the walls, which can easily affect the labor time and cost. Choose a putty that can be easily beaten to a spread and can be applied uniformly; thus, use a putty that can be mixed easily.
6. Durability and Adhesion
A paint-friendly and long-lasting wall putty can help provide a beautiful and stable surface to work on walls. Therefore, it is wise to look at brands that provide high adhesion strength to be able to bond to the plastered surface.
7. Compatibility with Paint
Certain wall putties are manufactured for use with one kind of paint than another: For instance:
Cement-based putty is used for oil-based paints.
It is recommended that acrylic putty be used in conjunction with water-based paints. Therefore, it is important to check with manufacturers on compatibility before using the two products together.
8. Read Other Customer’s Reviews and Brand Image
Credible companies can provide good quality products and good quality after sales services. There is usually important information on customer satisfaction feedback in shape of online reviews.
The application of wall putty and the following process go into it
The process of wall putty application is worth noticing. So here’s the step-by-step way:
1. Surface Preparation:
Plan and wash the wall to remove dust, grease, or loose plaster.
2. First Coat:
Use a putty knife to spread out a thin layer of putty on wall. Stud technique: Make sure that the coat is an even and flat plane.
3. Drying Time:
Allow for good drying of the first coat; this will take 6 to 8 hours.
4. Second Coat:
If used, the second coat must be applied in a manner in such a way that nothing is able to hide through the painting process.
5. Sanding:
Once the putty is dry, apply another layer then sand it to smooth out the surface.
For painting, one can apply putty to the walls so that once the paint touches the wall, it produces the right texture.
Wall Putty Vs Plaster Of Paris
One should first understand the difference between the wall putty and the plaster of Paris (POP) because both of the compounds are used in the wall treatment process.
- Wall Putty: Coating which allows painting and forms a background for covering the walls and ceiling.
- POP: Mostly employed in producing aesthetic features such as false floors and other added-on trims.
Realizing its effectiveness when used together with wall putty, POP provides a perfect finish to the surface.
Some of the Most Known Wall Putty and Their Receiving Price
Generally, wall putty costs differ by brand or type of putty, quality, and location. Here’s a quick overview of some well-known brands:
- Birla White Putty: Especially for its better finish and longer lasting.
- JK Wall Putty: Provides very good wetting characteristics and a smooth surface.
- Asian Paints TruCare: This was quoted as a good material and gives a reliable option with good crack-filling properties.
A 20 kg bag costs between 10 and 50 dollars, depending on the brand and type of the fertilizer. So, you now have the opportunity to make some comparisons and to choose the most suitable price to complete the contractor’s work.
Care That Should Be Taken After Applying Wall Putty
- Avoid Moisture Exposure: Encapsulate the walls against any form of moisture for at least one week after applying the solution.
- Proper Primer Use: One helpful tip to paint is to use a good quality primer before painting to seal the putty layer well.
- Regular Cleaning: This painted surface should be washed gently and frequently so that the paint keeps its appearance.
Conclusion
Selecting the right wall putty is an important process of getting smooth, strong, and ready-to-paint wall surfaces. The other important criterion that can be used to compare the wall putty prices includes compatibility of the wall putty with the existing surface, moisture content of the wall, and ease of the wall putty application. Combining wall putty with a plaster of Paris ceiling can bring some added aesthetics to your home, and make it look polished and professional.
Use good quality materials and the right manner in which the walls are put into place for great results that will be long-lasting and attractive.